Dell Force10 S4820T FTOS Command Reference Guide - Page 1427
snmp-server view, snmp trap link-status
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1427 highlights
snmp-server view c e s z Configure an SNMPv3 view. Syntax Parameters Defaults Command Modes Command History Usage Information Example snmp-server view view-name oid-tree {included | excluded} To remove an SNMPv3 view, use the no snmp-server view view-name oid-tree {included | excluded}} command. view-name oid-tree included excluded Enter the name of the view (not to exceed 20 characters). Enter the OID sub tree for the view (not to exceed 20 characters). (OPTIONAL) Enter the keyword included to include the MIB family in the view. (OPTIONAL) Enter the keyword excluded to exclude the MIB family in the view. No default behavior or values. CONFIGURATION Version 8.3.19.0 Introduced on S4820T Version 8.3.11.1 Introduced on Z9000 Version 8.3.7.0 Introduced on S4810 Version 7.6.1.0 Support added for S-Series Version 7.5.1.0 Support added for C-Series E-Series legacy command The oid-tree variable is a full sub-tree starting from 1.3.6 and can not specify the name of a sub-tree or a MIB. The following example configures a view named rview that allows access to all objects under 1.3.6.1: FTOS# conf FTOS#(conf) snmp-server view rview 1.3.6.1 included Related Commands show running-config snmp Display the SNMP running configuration snmp trap link-status c e s z Enable the interface to send SNMP link traps, which indicate whether the interface is up or down. Syntax snmp trap link-status Simple Network Management Protocol and Syslog | 1427