Dell Force10 S4820T FTOS Command Reference Guide - Page 172

www.dell.com | support.dell.com Related Commands dot1x port-control dot1x guest-vlan show dot1x interface Enable port control on an interface. Configure a guest VLAN for limited access users or for devices that are not 802.1X capable. Display the 802.1X configuration of an interface. dot1x auth-server c e s Configure the authentication server to RADIUS. Syntax Defaults Command Modes Command History dot1x auth-server radius No default behavior or values CONFIGURATION Version 8.3.19.0 Version 8.3.12.0 Version 7.6.1.0 Version 7.4.1.0 Introduced on the S4820T Introduced on the S4810 Introduced on C-Series and S-Series Introduced on E-Series dot1x auth-type mab-only c s Use only the host MAC address to authenticate a device with MAC authentication bypass (MAB). Syntax Defaults Command Modes Command History Usage Information dot1x auth-type mab-only Disabled INTERFACE Version 8.3.19.0 Version 8.3.12.0 Version 8.4.2.1 Introduced on the S4820T Introduced on the S4810 Introduced on the C-Series and S-Series The prerequisites for enabling MAB-only authentication on a port are: • 802.1X authentication must be enabled globally on the switch and on the port (dot1x authentication command). • MAC authentication bypass must be enabled on the port (dot1x mac-auth-bypass command). 172 | 802.1X