Dell Force10 S4820T FTOS Command Reference Guide - Page 473

Syntax dcb-policy output stack-unit {all | stack-unit-id} stack-ports all dcb-output-policy-name To remove all DCB output policies applied to the stacked ports, use the no dcb-policy output stack-unit all command. To remove only the DCB output policies applied to the specified switch, use the no dcb-policy output stack-unit command. Parameters stack-unit-id dcb-output-policyname Enter the stack unit identification. Enter the policy name for the DCB output policy. Defaults none Command Modes CONFIGURATION Command History Version 8.3.19.0 Version 8.3.12.0 Version 8.3.16.0 Introduced on the S4820T. Introduced on the S4810. Introduced on MXL 10/40GbE Switch IO Module Usage Information The dcb-policy output stack-unit all command overwrites any previous dcb-policy output stack-unit stack-unit-id configurations. Similarly, a dcb-policy output stack-unit stack-unit-id command overwrites any previous dcb-policy output stack-unit all configuration. You can apply a DCB output policy with ETS configuration to all stacked ports in a switch stack or an individual stacked switch. You can apply different DCB output policies to different stack units. Related Commands dcb-policy input stack-unit stack-ports all Apply the specified DCB input policy. dcb stack-unit all pfc-buffering pfc-port pfc-queues Configure the PFC buffer for all switches in the stack. Syntax dcb stack-unit all pfc-buffering pfc-port {1-64} pfc-queues {1-2} To remove the configuration for the PFC buffer on all switches in the stack, use the no dcb stack-unit all pfc-buffering pfc-port-count pfc-queues command. Parameters pfc-port-count {1-64} pfc-queues {1-2} Enter the pfc-port count. Range: 1 to 64. Enter the pfc-queue number. Range: 1 to 2. Defaults The PFC buffer is enabled on all ports on the stack unit. Command Modes CONFIGURATION Data Center Bridging | 473