Dell Force10 S4820T FTOS Command Reference Guide - Page 114

www.dell.com | support.dell.com Example (C-Series) Example (show linecard brief) FTOS#show linecard 11 -- Line card 11 -- Status : online Next Boot : online Required Type : E48PF - 48-port GE line card with SFP optics (EF) Current Type : E48PF - 48-port GE line card with SFP optics (EF) Hardware Rev : Base - 1.0 PP0 - n/a PP1 - n/a Num Ports : 48 Up Time : 12 hr, 37 min FTOS Version : 6.2.1.x Jumbo Capable : yes Boot Flash : A: 2.0.3.4 B: 2.0.3.4 [booted] Memory Size : 268435456 bytes Temperature : 49C Power Status : PEM0: absent or down PEM1: up Voltage : ok Serial Number : Part Number : Rev Vendor Id : Date Code : Country Code : FTOS# FTOS#show linecard 11 brief -- Line card 11 -- Status : online Next Boot : online Required Type : E48PF - 48-port GE line card with SFP optics (EF) Current Type : E48PF - 48-port GE line card with SFP optics (EF) Hardware Rev : Base - 1.0 PP0 - n/a PP1 - n/a Num Ports : 48 Up Time : 11 hr, 24 min FTOS Version : 6.1.1.0 Jumbo Capable : yes FTOS# Table 4-1 list the definitions of the fields shown in the examples. Table 4-1. Descriptions for show linecard output Field Line card Status Next Boot Required Type Current Type Hardware Rev Description Displays the line card slot number (only listed in show linecard all command output). Displays the line card's status. Displays whether the line card is to be brought online at the next system reload. Displays the line card type configured for the slot. The Required Type and Current Type must match. Use the linecard command to reconfigure the line card type if they do not match. Displays the line card type installed in the slot. The Required Type and Current Type must match. Use the linecard command to reconfigure the line card type if they do not match. Displays the chip set revision. 114 | Control and Monitoring