Dell Force10 S4820T FTOS Command Reference Guide - Page 606
disable-on-sfm-failure, duplex Management
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 606 highlights
www.dell.com | support.dell.com Related Commands • Entering a text string after the description command overwrites any previous text string configured as the description. • The shutdown and description commands are the only commands that you can configure on an interface that is a member of a port-channel. • Use the show interfaces description command to display descriptions configured for each interface. show interfaces description Display description field of interfaces. disable-on-sfm-failure e Disable select ports on E300 systems when a single SFM is available. Syntax disable-on-sfm-failure To delete a description, enter no disable-on-sfm-failure. Defaults Port is not disabled Command Modes INTERFACE Command History Usage Information Version 7.7.1.0 Introduced on E300 systems only When an E300 system boots up and a single SFM is active this configuration, any ports configured with this feature will be shut down. If an SFM fails (or is removed) in an E300 system with two SFM, ports configured with this feature will be shut down. All other ports are treated normally. When a second SFM is installed or replaced, all ports are booted up and treated as normally. This feature does not take affect until a single SFM is active in the E300 system. duplex (Management) c e Set the mode of the Management interface. Syntax duplex {half | full} To return to the default setting, enter no duplex. Parameters half Enter the keyword half to set the Management interface to transmit only in one direction. full Enter the keyword full to set the Management interface to transmit in both directions. Defaults Not configured Command Modes INTERFACE 606 | Interfaces