Dell Force10 S4820T FTOS Command Reference Guide - Page 377

* I * I FTOS# 192.100.9.2 192.100.10.2 20000 20000 9999 0 ? 9999 0 ? Table 9-6 defines the information displayed in the previous example. Table 9-6. Command Example fields: show ip bgp filter-list Field Path source codes Next Hop Metric LocPrf Weight Path Description Lists the path sources shown to the right of the last AS number in the Path column: • i = internal route entry • a = aggregate route entry • c = external confederation route entry • n = network route entry • r = redistributed route entry Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table. Displays the BGP route's metric, if assigned. Displays the BGP LOCAL_PREF attribute for the route. Displays the route's weight Lists all the ASs the route passed through to reach the destination network. Command History Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series show ip bgp flap-statistics c e s View flap statistics on BGP routes. Syntax Parameters show ip bgp [ipv4 unicast] flap-statistics [ip-address [mask]] [filter-list as-path-name] [regexp regular-expression] ipv4 unicast ip-address mask (OPTIONAL) Enter the ipv4 unicast keywords to view information only related to ipv4 unicast routes. (OPTIONAL) Enter the IP address (in dotted decimal format) of the BGP network to view information only on that network. (OPTIONAL) Enter the network mask (in slash prefix (/x) format) of the BGP network address. Border Gateway Protocol IPv4 (BGPv4) | 377