Dell Force10 S4820T FTOS Command Reference Guide - Page 1131

Intf-Down 0 Non-Dr 0 Self-Org 0 Wrong-Len 0 Invld-Nbr 0 Nbr-State 0 Auth-Err 0 MD5-Err 0 Chksum 0 Version 0 AreaMis 0 Conf-Issues 0 No-Buffer 0 Seq-No 0 Socket 0 Q-OverFlow 0 Unkown-Pkt 0 Error packets (Only for TX) Socket Errors 0 FTOS# Table 37-12. Command Example Descriptions: show ip ospf statistics process-id global Row Heading Description Total Error Displays the total number of packets received/transmitted by the OSPF process Displays the error count while receiving and transmitting packets by the OSPF process Hello Number of OSPF Hello packets DDiscr Number of database description packets LSReq Number of link state request packets LSUpd LSAck TxQ-Len RxQ-Len Tx-Mark Number of link state update packets Number of link state acknowledgement packets The transmission queue length The reception queue length The highest number mark in the transmission queue Rx-Mark The highest number mark in the reception queue Hello-Q The queue, for transmission or reception, for the hello packets LSR-Q Other-Q The queue, for transmission or reception, for the link state request packets. The queue, for transmission or reception, for the link state acknowledgement, database description, and update packets. Table 37-13. Error Definitions: show ip ospf statistics process-id global Error Type Intf_Down Non-Dr Self-Org Wrong_Len Invld-Nbr Nbr-State Auth-Error Description Received packets on an interface that is either down or OSPF is not enabled. Received packets with a destination address of ALL_DRS even though SELF is not a designated router Receive the self originated packet The received packet length is different to what was indicated in the OSPF header LSA, LSR, LSU, and DDB are received from a peer which is not a neighbor peer LSA, LSR, and LSU are received from a neighbor with stats less than the loading state Simple authentication error Open Shortest Path First (OSPFv2) | 1131