Dell Force10 S4820T FTOS Command Reference Guide - Page 61
specifying the, individual RPM, line cards, SFM FPGA, and system-image for cache-boot without - ac r
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Defaults Command Modes Command History Usage Information all linecard number rpm repair booted file-url Enter the keyword all to upgrade the bootflash or boot selector image on all processors. This keyword does not upgrade the bootflash on the standby RPM. Enter the keyword all after the keyword linecard to upgrade the bootflash or boot selector image on all linecards. Enter the keyword linecard followed by the line card slot number. Range: E1200 and E1200i AC/DC: 0-13 E600 and E600i: 0-6 E300: 0-5 C300: 0-7 C150: 0-3 S-Series: 0-0 Enter the keyword rpm to upgrade the system image of a selector image on all processors on the RPM. Enter this keyword to upgrade a line card newly inserted into an already upgraded chassis. This option is only available with the system-image keyword. Upgrade the bootflash or bootselector image using the currently running FTOS image. Enter the following location keywords and information to upgrade using an FTOS image other than the one currently running: • To specify an FTOS image on the internal flash, enter flash:// file-path/filename. • To specify an FTOS image on an FTP server, enter ftp:// user:password@hostip/filepath • To specify an FTOS image on the external flash on the primary RPM, slot0://file-path/filename • To copy a file on a TFTP server, enter tftp://hostip/filepath/ filename FTOS uses the boot flash image that was packed with it if no URL is specified. EXEC Privilege Version 7.7.1.0 Introduced system-image option Version 7.5.1.0 Introduced on C-Series E-Series original Command A system message appears stating the Bootflash upgrade status. Reload the system to boot from the upgraded boot images. Once the URL is specified, the same downloaded image can be used for upgrading an individual RPM, line cards, SFM FPGA, and system-image for cache-boot without specifying the file-url again using the command upgrade {bootflash-image | bootselector-image | system-image} {all | linecard linecard-slot | rpm}. After 20 minutes, the cached memory is released and returned for general use, but the URL is maintained and you do not have to specify it for subsequent upgrades. File Management | 61