Dell Force10 S4820T FTOS Command Reference Guide - Page 858

www.dell.com | support.dell.com Table 27-1. Command Example fields: show ip bgp ipv6 unicast neighbors Lines beginning with Prefixes accepted Prefixes advertised Connections established Last reset Local host: Foreign host: Description Displays the number of network prefixes accepted by the router and the amount of memory used to process those prefixes. Displays the number of network prefixes advertised, the number rejected and the number withdrawn from the BGP routing table. Displays the number of TCP connections established and dropped between the two peers to exchange BGP information. Displays the amount of time since the peering session was last reset. Also states if the peer resets the peering session. If the peering session was never reset, the word never is displayed. Displays the peering address of the local router and the TCP port number. Displays the peering address of the neighbor and the TCP port number. Related Commands show ip bgp ipv6 unicast View the current BGP routing table. show ip bgp ipv6 unicast peer-group c e Allows you to view information on the BGP peers in a peer group. Syntax Parameters Command Modes Command History show ip bgp ipv6 unicast peer-group [peer-group-name [summary]] peer-group-name detail summary (OPTIONAL) Enter the name of a peer group to view information about that peer group only. (OPTIONAL) Enter the keyword detail to view peer-group-specific information for the IPv6 address family. (OPTIONAL) Enter the keyword summary to view status information of the peers in that peer group. The output is the same as that found in show ip bgp ipv6 unicast summary command EXEC EXEC Privilege Version 8.3.19.0 Introduced on S4820T Version 8.4.2.1 Introduced on C-Series and S4810 858 | IPv6 Border Gateway Protocol (IPv6 BGP)