Dell Force10 S4820T FTOS Command Reference Guide - Page 914

www.dell.com | support.dell.com Defaults No default behavior or values Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 8.3.19.0 Version 8.3.12.0 Version 7.8.1.0 Version 6.3.1.0 Introduced on S4820T Introduced on S4810 Introduced IPv6 ISIS support Introduced Usage When the command is executed, IS-IS will not download the route to the routing table if the same route Information was redistributed into IS-IS routing protocol on the same router. domain-password e Set the authentication password for a routing domain. Syntax domain-password [hmac-md5 | encryption-type] password To disable the password, enter no domain-password. Parameters hmac-md5 encryption-type password (OPTIONAL) Enter the keyword hmac-md5 to encrypt the password using MD5. (OPTIONAL) Enter 7 to encrypt the password using DES. Enter an alphanumeric string up to 16 characters long. If you do not specify an encryption type or hmac-md5 keywords, the password is processed as plain text which provides limited security. Defaults No default password. Command Modes ROUTER ISIS Command History Version 8.3.19.0 Version 8.3.12.0 Version 6.3.1.0 Introduced on S4820T Introduced on S4810 Introduced Usage The domain password is inserted in Level 2 link state PDUs (LSPs), complete sequence number PDUs Information (CSNPs), and partial sequence number PDUs (PSNPs). Related Commands area-password isis password Configure an IS-IS area authentication password. Configure the authentication password for an interface. 914 | Intermediate System to Intermediate System (IS-IS)