Dell Force10 S4820T FTOS Command Reference Guide - Page 713

Table 24-6. show hosts Command Example Fields Field Description Default domain... Displays the domain name (if configured). Name/address lookup... States if DNS is enabled on the system. If DNS is enabled, the Name/Address lookup is domain service. If DNS is not enabled, the Name/Address lookup is static mapping. Name servers are... Lists the name servers, if configured. Host Flags Displays the host name assigned to the IP address. Classifies the entry as one of the following: • perm - the entry was manually configured and will not time out • temp - the entry was learned and will time out after 72 hours of inactivity. Also included in the flag is an indication of the validity of the route: • ok - the entry is valid. • ex - the entry expired. • ?? - the entry is suspect. TTL Type Address Displays the amount of time until the entry ages out of the cache. For dynamically learnt entries only. Displays IP as the type of entry. Displays the IP address(es) assigned to the host. Related Commands traceroute ip host View DNS resolution Configure a host. show ip cam linecard c e View CAM entries for a port pipe on a line card. Syntax Parameters show ip cam linecard number port-set pipe-number [ip-address mask [longer-prefixes] | index index-number | summary | vrf vrf instance] number pipe-number ip-address mask [longer-prefix] index index-number Enter the number of the line card. Range: 0 to 13 on a E1200/1200i, 0 to 6 on a E600600i, and 0 to 5 on a E300. Enter the number of the line card's port-pipe. Range: 0 to 1 (OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. Enter the keyword longer-prefixes to view routes with a common prefix. (OPTIONAL) Enter the keyword index followed by the CAM index number. Range: depends on CAM size IPv4 Routing | 713