Dell Force10 S4820T FTOS Command Reference Guide - Page 105
port or CPU is specified. Traffic information is displayed for router ports only; not
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Command History Example (E-Series) Usage Information Version 7.6.1.0 Version 7.5.1.0 Version 6.2.1.1 Introduced on S-Series Introduced on C-Series Introduced on E-Series FTOS#show cpu-traffic-stats Processor : CP Received 100% traffic on GigabitEthernet 8/2 LLC:0, SNAP:0, IP:100, ARP:0, other:0 Unicast:100, Multicast:0, Broadcast:0 Total packets:100 Processor : RP1 Received 62% traffic on GigabitEthernet 8/2 LLC:0, SNAP:0, IP:500, ARP:0, other:0 Unicast:500, Multicast:0, Broadcast:0 Total packets:500 Received 37% traffic on GigabitEthernet 8/1 LLC:0, SNAP:0, IP:300, ARP:0, other:0 Unicast:300, Multicast:0, Broadcast:0 Total packets:300 Processor : RP2 No CPU traffic statistics. FTOS# Traffic statistics are sorted on a per-interface basis; the interface receiving the most traffic is displayed first. All CPU and port information is displayed unless a specific port or CPU is specified. Traffic information is displayed for router ports only; not for management interfaces. The traffic statistics are collected only after the debug cpu-traffic-stats command is executed; not from the system bootup. Note: After debugging is complete, use the no debug cpu-traffic-stats command to shut off traffic statistics collection. Related Commands debug cpu-traffic-stats Enable CPU traffic statistics for debugging show debugging c e s View a list of all enabled debugging processes. Syntax Command Mode show debugging EXEC Privilege Command History Version 8.1.1.0 Introduced on E-Series ExaScale Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series original Command Example FTOS#show debug Control and Monitoring | 105