Dell Force10 S4820T FTOS Command Reference Guide - Page 1257

To remove the WRED drop precedence, use the no wred {yellow | green} [profile-name] command. Parameters yellow | green profile-name Enter the keyword yellow for yellow traffic. DSCP value of xxx110 and xxx100 maps to yellow. Enter the keyword green for green traffic. DSCP value of xxx010 maps to green. Enter your WRED profile name in character format (16 character maximum). Or use one of the 5 pre-defined WRED profile names. Pre-defined Profiles: wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_ Defaults No default behavior or values Command Modes CONFIGURATION (conf-qos-policy-out) Command History Version 8.3.19.0 Introduced on S4820T Version 8.3.7.0 Introduced on S4810 Version 8.2.1.0 Profile name character limit increased from 16 to 32. pre-Version 6.1.1.1 Introduced on E-Series Usage Use this command to assign drop precedence to green or yellow traffic. If there is no honoring Information enabled on the input, all the traffic defaults to green drop precedence. Related Commands wred-profile trust Create a WRED profile and name that profile Define the dynamic classification to trust DSCP wred-profile e Create a WRED profile and name that profile. Syntax wred-profile wred-profile-name To remove an existing WRED profile, use the no wred-profile command. Parameters wred-profile-name Enter your WRED profile name in character format (16 character maximum). Or use one of the pre-defined WRED profile names. You can configure up to 26 WRED profiles plus the 5 pre-defined profiles, for a total of 31 WRED profiles. Pre-defined Profiles: wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_g Defaults The five pre-defined WRED profiles. When a new profile is configured, the minimum and maximum threshold defaults to predefined wred_ge_g values Quality of Service (QoS) | 1257