Dell Force10 S4820T FTOS Command Reference Guide - Page 527

Example Without FIPS Mode enabled: FTOS#sh ip ssh SSH server : enabled. SSH server version : v1 and v2. Password Authentication : enabled. Hostbased Authentication : disabled. RSA Authentication : disabled. Vty Encryption HMAC 1 3des-cbc hmac-md5 2 3des-cbc hmac-md5 Remote IP 10.1.20.48 10.1.20.48 With FIPS Mode enabled: FTOS#sh ip ssh SSH server : enabled. SSH server version : v2. Password Authentication : enabled. Hostbased Authentication : disabled. RSA Authentication : disabled. Vty Encryption HMAC * 0 aes128-cbc hmac-sha1 1 aes128-cbc hmac-sha1 Remote IP 10.11.8.13 10.1.20.48 Related Commands ip ssh server show ip ssh client-pub-keys Configure an SSH server. Display the client-public keys. ssh c e s : Open an SSH connection specifying the hostname, username, port number and version of the SSH client. FTOS supports both inbound and outbound SSH sessions using IPv4 or IPv6 addressing. Inbound SSH supports accessing the system through the management interface as well as through a physical Layer 3 interface. Note: Some of the parameters in this command require licensing to access.. For more information, please contact your Dell Force10 representative. Syntax ssh {hostname | ipv4 address | ipv6 address} [-c encryption cipher | -l username | -m HMAC algorithm | -p port-number | -v {1 | 2}] Parameters hostname vrf instance (OPTIONAL) Enter the IP address or the hostname of the remote device. (OPTIONAL) E-Series Only: Enter the keyword vrf following by the VRF Instance name to open a SSH connection to that instance. FIPS Cryptography | 527