Dell Force10 S4820T FTOS Command Reference Guide - Page 170

www.dell.com | support.dell.com Important Points to Remember FTOS limits network access for certain users by using VLAN assignments. 802.1X with VLAN assignment has these characteristics when configured on the switch and the RADIUS server. • 802.1X is supported on c C-Series, e E-Series, s S-Series (S25/S50), , and E-Series Terascale e t. • 802.1X is not supported on the LAG or the channel members of a LAG. • If no VLAN is supplied by the RADIUS server or if 802.1X authorization is disabled, the port is configured in its access VLAN after successful authentication. • If 802.1X authorization is enabled but the VLAN information from the RADIUS server is not valid, the port returns to the unauthorized state and remains in the configured access VLAN. This prevents ports from appearing unexpectedly in an inappropriate VLAN due to a configuration error. Configuration errors create an entry in Syslog. • If 802.1X authorization is enabled and all information from the RADIUS server is valid, the port is placed in the specified VLAN after authentication. • If port security is enabled on an 802.1X port with VLAN assignment, the port is placed in the RADIUS server assigned VLAN. • If 802.1X is disabled on the port, it is returned to the configured access VLAN. • When the port is in the force authorized, force unauthorized, or shutdown state, it is placed in the configured access VLAN. • If an 802.1X port is authenticated and put in the RADIUS server assigned VLAN, any change to the port access VLAN configuration will not take effect. • The 802.1X with VLAN assignment feature is not supported on trunk ports, dynamic ports, or with dynamic-access port assignment through a VLAN membership. debug dot1x e c s Display 802.1X debugging information. Syntax Parameters 170 | 802.1X debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu] [interface interface] all auth-pae-fsm backend-fsm eapol-pdu interface interface Enable all 802.1X debug messages. Enable authentication PAE FSM debug messages. Enable Backend FSM debug messages. Enable EAPOL frame trace and related debug messages Restricts the debugging information to an interface.