Dell Force10 S4820T FTOS Command Reference Guide - Page 253

Command Modes Command History Default Related Commands EXEC Privilege Version 8.1.1.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on E-Series ExaScale Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Support added for S-Series Support added for C-Series Introduced for E-Series Clears "hit" counters for all prefix lists unless a prefix list is specified. ip prefix-list Configure a prefix list. deny c e s Syntax Parameters Defaults Command Modes Command History Usage Information Related Commands Configure a filter to drop packets meeting the criteria specified. deny ip-prefix [ge min-prefix-length] [le max-prefix-length] ip-prefix ge min-prefix-length le max-prefix-length Not configured. PREFIX-LIST Specify an IP prefix in the network/length format. For example, 35.0.0.0/8 means match the first 8 bits of address 35.0.0.0. (OPTIONAL) Enter the keyword ge followed by the minimum prefix length, which is a number from zero (0) to 32. (OPTIONAL) Enter the keyword le followed by the maximum prefix length, which is a number from zero (0) to 32. Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on E-Series ExaScale Support added for S-Series Support added for C-Series Introduced for E-Series Sequence numbers for this filter are automatically assigned starting at sequence number 5. If the options ge or le are not used, only packets with an exact match to the prefix are filtered. permit seq Configure a filter to pass packets. Configure a drop or permit filter with a specified sequence number. Access Control Lists (ACL) | 253