Dell Force10 S4820T FTOS Command Reference Guide - Page 925

isis metric e Assign a metric to an interface. Syntax isis metric default-metric [level-1 | level-2] To return to the default values, enter no isis metric [default-metric] [level-1 | level-2]. Parameters default-metric level-1 level-2 Metric assigned to the link and used to calculate the cost from each other router via the links in the network to other destinations. You can configure this metric for Level 1 or Level 2 routing. Range: 0 to 63 for narrow and transition metric styles; 0 to 16777215 for wide metric styles. Default: 10 (OPTIONAL) Enter level-1 to configure the shortest path first (SPF) calculation for Level 1 (intra-area) routing. This is the default. (OPTIONAL) Enter level-2 to configure the SPF calculation for Level 2 (inter-area) routing. Defaults default-metric = 10; level-1 (if not otherwise specified) Command Modes INTERFACE Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 Usage Dell Force10 recommends configuring metrics on all interfaces. Without configuring this command, Information the IS-IS metrics are similar to hop-count metrics. isis network point-to-point e Enable the software to treat a broadcast interface as a point-to-point interface. Syntax isis network point-to-point To disable the feature, enter no isis network point-to-point. Defaults Not enabled. Command Modes INTERFACE Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 Intermediate System to Intermediate System (IS-IS) | 925