Dell Force10 S4820T FTOS Command Reference Guide - Page 938

www.dell.com | support.dell.com match {external | internal} route-map map-name (OPTIONAL) The command used for OSPF to route and redistribute into other routing domains. The values are • internal • external map-name is an identifier for a configured route map. The route map should filter imported routes from the source routing protocol to the current routing protocol. If you do not specify a map-name, all routes are redistributed. If you specify a keyword, but fail to list route map tags, no routes will be imported. Defaults As above Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 8.3.19.0 Version 8.3.12.0 Version 7.5.1.0 Version 6.3.1.0 Introduced on S4820T Introduced on S4810 Introduced IPv6 ISIS support Introduced Usage Information How a metric value assigned to a redistributed route is advertised depends on how on the configuration of the metric-style command. If the metric-style command is set for narrow mode and the metric value in the redistribute ospf command is set to a number higher than 63, the metric value advertised in LSPs will be 63. If the metric-style command is set for wide mode, an the metric value in the redistribute ospf command is advertised. router isis e Allows you to enable the IS-IS routing protocol and to specify an IP IS-IS process. Syntax router isis [tag] To disable IS-IS routing, enter no router isis [tag]. Parameters tag (OPTIONAL) This is a unique name for a routing process. A null tag is assumed if the tag option is not specified. The tag name must be unique for all IP router processes for a given router. Defaults Not configured. Command Modes ROUTER ISIS Command History Version 8.3.19.0 Version 8.3.12.0 Introduced on S4820T Introduced on S4810 Usage You must configure a network entity title (the net command) to specify the area address and the router Information system ID. 938 | Intermediate System to Intermediate System (IS-IS)