Dell Force10 S4820T FTOS Command Reference Guide - Page 291

Defaults Command Modes Command History Example multiplier value role [active | passive] Parameters INTERFACE Enter this keyword to specify the number of packets that must be missed in order to declare a session down. Range: 3 to 50 Default: 3 Enter the role that the local system assumes: • Active-The active system initiates the BFD session. Both systems can be active for the same session. • Passive-The passive system does not initiate a session. It only responds to a request for session initialization from the active system. Default: Active Version 8.3.19.0 Version 8.3.12.0 Version 8.3.10.0 Version 8.2.1.0 Version 7.6.1.0 Version 7.4.1.0 Introduced on S4820T Deprecated command. Replaced by Introduced on S4810 Introduced on E-Series ExaScale Introduced on C-Series Introduced on E-Series FTOS(conf-if-gi-0/3)#bfd interval 250 min_rx 300 multiplier 4 role passive FTOS(conf-if-gi-0/3)# bfd neighbor c e Establish a BFD session with a neighbor. This command is deprecated as of FTOS 8.3.12.0. Syntax Parameters bfd neighbor ip-address ip-address Enter the IP address of the neighbor in dotted decimal format (A.B.C.D). Defaults None Command Modes INTERFACE Command History Version 8.3.19.0 Version 8.3.12.0 Version 8.3.10.0 Version 8.2.1.0 Version 7.6.1.0 Introduced on S4820T Deprecated command. Replaced by Introduced on S4810 Introduced on E-Series ExaScale Introduced on C-Series Bidirectional Forwarding Detection (BFD) | 291