Dell Force10 S4820T FTOS Command Reference Guide - Page 14

www.dell.com | support.dell.com Convention keyword parameter {X} [X] x | y x||y Conventions This document uses the following conventions to describe command syntax: Description Keywords are in bold and should be entered in the CLI as listed. Parameters are in italics and require a number or word to be entered in the CLI. Keywords and parameters within braces must be entered in the CLI. Keywords and parameters within brackets are optional. Keywords and parameters separated by bar require you to choose one. Keywords and parameters separated by a double bar enables you to choose any or all of them. Information Symbols Table 1-1 describes symbols contained in this guide. Table 1-1. Information Symbols Symbol Brief Note Caution Warning Description This symbol signals important operational information. This symbol signals information about situations that could result in equipment damage or loss of data. This symbol signals information about hardware handling that could result in injury. c e et ex s C-Series This symbol indicates that the selected feature is supported on the C-Series. E-Series This symbol indicates that the selected feature is supported on the E-Series TeraScale AND E-Series ExaScale. E-Series This symbol indicates that the selected feature is supported on the E-Series TeraScale platform TeraScale only. E-Series This symbol indicates that the selected feature is supported on the E-Series ExaScale platform ExaScale only. S-Series This symbol indicates that the selected feature is supported on the S-Series. Related Documents For more information about the system, refer to the following documents: 14 | About this Guide