Dell Force10 S4820T FTOS Command Reference Guide - Page 69

Parameters unit-id queue size Enter the stack member unit identifier of the stack member to reset. S4810 and S4820T range: 0 - 11 Z9000 range: 0 - 7 all Note: The S4810 and S4820T commands accept Unit ID numbers 0-11, though S4810 and the S4820T support stacking up to 6 units with FTOS version 8.3.12.0. Enter the queue size of the stack member. Range: 0 - 15 Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.19.0 Version 8.3.11.0 Version 8.3.7.0 Introduced on the S4820T Introduced on the Z9000 Introduced on the S4810 Usage Information You must save the configuration and reload the system to implement ASF. When you enter the command, the system sends a message stating that the new mode is enabled when the system reloads. audible cut-off e Turn off an audible alarm. Syntax audible cut-off Defaults Not configured. Command Modes EXEC Privilege banner exec c e s Configure a message that is displayed when a user enters the EXEC mode. Syntax banner exec c line c Parameters c line Enter the keywords banner exec, and then enter a character delineator, represented here by the letter c, and press ENTER. Enter a text string for your banner message ending the message with your delineator. In the example below, the delineator is a percent character (%); the banner message is "testing, testing". Defaults No banner is displayed. Command Modes CONFIGURATION Control and Monitoring | 69