Dell Force10 S4820T FTOS Command Reference Guide - Page 1477

Related Commands clock read-calendar clock set clock update-calendar show clock Set the software clock based on the hardware clock. Set the software clock. Set the hardware clock based on the software clock. Display clock settings. clock read-calendar c e s Set the software clock on the switch from the information set in hardware clock (calendar). Syntax Defaults Command Modes Command History Usage Information clock read-calendar Not configured. EXEC Privilege Version 8.3.19.0 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on S4820T Introduced on S4810 Support added for S-Series Support added for C-Series Introduced for E-Series In the switch, the hardware clock is separate from the software and is called the calendar. This hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS automatically updates the software clock after system bootup. You cannot delete this command (that is, there is not a "no" version of this command). clock set c e s Syntax Parameters Set the software clock in the switch. clock set time month day year time month Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format, example, 17:15:00 is 5:15 pm. Enter the name of one of the 12 months, in English. You can enter the number of a day and change the order of the display to time day month year. System Time and Date | 1477