Dell Force10 S4820T FTOS Command Reference Guide - Page 1233
queue backplane ignore-backpressure, queue egress
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1233 highlights
queue backplane ignore-backpressure e Reduce egress pressure by ignoring the ingress backpressure Syntax queue backplane ignore-backpressure To return to the default, use the no queue backplane ignore-backpressure command. Defaults No default behavior or values Command Modes CONFIGURATION Command History Version 7.7.1.0 Introduced on E-Series queue egress e Assign a WRED Curve to all eight egress Multicast queues or designate the percentage for the Multicast bandwidth queue. Syntax queue egress multicast linecard {slot number port-set number | all} [wred-profile name | multicast-bandwidth percentage] To return to the default, use the no queue egress multicast linecard {slot number port-set number | all} [wred-profile name | multicast-bandwidth percentage] command. Parameters linecard number port-set number all wred-profile name multicast-bandwidth percentage Enter the keyword linecard followed by the line card slot number. E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300. Enter the keyword port-set followed by the line card's port pipe. Range: 0 or 1 Enter the keyword all to apply to all line cards. (OPTIONAL) Enter the keyword wred-profile followed by your WRED profile name in character format (16 character maximum). Or use one of the pre-defined WRED profile names. Pre-defined Profiles: wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_g (OPTIONAL) Enter the keyword multicast-bandwidth followed by the bandwidth percentage. Range: 0 to 100% Defaults No default behavior or values Command Modes CONFIGURATION Command History Version 7.5.1.0 Version 7.4.1.0 and 6.5.3.0 Added support for multicast-bandwidth Introduced on E-Series Quality of Service (QoS) | 1233