Dell Force10 S4820T FTOS Command Reference Guide - Page 917

graceful-restart t3 e Configure the overall wait time before Graceful Restart is completed. Syntax graceful-restart t3 {adjacency | manual} seconds To return to the default, use the no graceful-restart t3command. Parameters adjacency manual Enter the keyword adjacency so that the restarting router receives the remaining time value from its peer and adjusts its T3 value accordingly if user has configured this option. Enter the keyword manual to specify a time value that the restarting router uses. Range: 50-120 seconds default: 30 seconds Defaults manual, 30 seconds Command Modes ROUTER ISIS Command History Version 8.3.19.0 Version 8.3.12.0 Version 8.3.1.0 Introduced on S4820T Introduced on S4810 Introduced on the E-Series Usage The running router sets remaining time value to the current adjacency hold time. This can be Information overridden by implementing this command. Override the default restart-wait time by entering the no graceful-restart restart-wait command. When restart-wait is disabled, the current adjacency hold time is used. Be sure to set the t3 timer to adjacency on the restarting router when implementing this command. The restarting router gets the remaining time value from its peer and adjusts its T3 value accordingly only when you have configured graceful-restart t3 adjacency. Related Commands graceful-restart restart-wait Enable the Graceful Restart maximum wait time before a restarting peer comes up. graceful-restart restart-wait e Enable the Graceful Restart maximum wait time before a restarting peer comes up. Be sure to set the t3 timer to adjacency on the restarting router when implementing this command. Syntax graceful-restart restart-wait seconds To return to the default, use the no graceful-restart restart-wait command. Intermediate System to Intermediate System (IS-IS) | 917