Dell Force10 S4820T FTOS Command Reference Guide - Page 727

static summary (OPTIONAL) Enter the keyword static to view only routes configured by the ip route command. (OPTIONAL) Enter the keyword summary. Refer to show ip route summary. Command Modes EXEC EXEC Privilege Command History Version 8.3.19.0 Version 8.3.7.0 Version 8.1.1.0 Version 7.9.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on S4820T Introduced on S4810 Introduced on E-Series ExaScale Introduced VRF on the E-Series Introduced on S-Series Introduced on C-Series Introduced for E-Series Example Example (show ip route summary & show ip static route) FTOS#show ip route all Codes: C - connected, S - static, R - RIP B - BGP, IN - internal BGP, EX - external BGP, LO - Locally Originated O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1 N2 - OSPF NSSA external type 2, E1 - OSPF external type 1 E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1 L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default > - non-active route + - summary route Gateway of last resort is not set Destination ----------R 3.0.0.0/8 C > R C > R FTOS# 100.10.10.0/24 100.10.10.0/24 101.10.10.0/24 101.10.10.0/24 Gateway ------via 100.10.10.10, So 2/8 via 101.10.10.10, So 2/9 Direct, So 2/8 Direct, So 2/8 Direct, So 2/9 Direct, So 2/9 FTOS#show ip route summary Dist/Metric Last Change 120/1 00:07:12 0/0 120/0 0/0 120/0 00:08:54 00:08:54 00:09:15 00:09:15 Route Source Active Routes Non-active Routes connected 2 0 static 1 0 Total 3 0 Total 3 active route(s) using 612 bytes R1_E600i>show ip route static ? | Pipe through a command R1_E600i>show ip route static Destination Gateway Dist/Metric Last Change ----------- ------- *S 0.0.0.0/0 via 10.10.91.9, Gi 1/2 1/0 3d2h FTOS> IPv4 Routing | 727