Dell Force10 S4820T FTOS Command Reference Guide - Page 1271

Command History Usage Information Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 pre-Version 6.2.1.1 Introduced on S4820T Introduced on S4810 Introduced on S-Series Introduced on C-Series Introduced on E-Series This command triggers updates of the main RIP routing tables. debug ip rip c e s Examine RIP routing information for troubleshooting. Syntax Parameters Command Modes Command History debug ip rip [interface | database | events [interface] | packet [interface] | trigger] To turn off debugging output, use the no debug ip rip command. interface database events packet trigger (OPTIONAL) Enter the interface type and ID as one of the following: • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Note: This option is available only on E-Series when entered as a standalone option. It is available on both C-Series and E-Series as a sub-option. (OPTIONAL) Enter the keyword database to display messages when there is a change to the RIP database. (OPTIONAL) Enter the keyword events to debug only RIP protocol changes. (OPTIONAL) Enter the keyword events to debug only RIP protocol packets. Note: This option is available only on C-Series. (OPTIONAL) Enter the keyword trigger to debug only RIP trigger extensions. EXEC Privilege Version 8.3.19.0 Version 8.5.1.0 Introduced on S4820T Added support for 4-port 40G line cards on ExaScale. Routing Information Protocol (RIP) | 1271