Dell Force10 S4820T FTOS Command Reference Guide - Page 339

Command History Version 8.3.19.0 Introduced on the S4820T. Version 8.3.8.0 Introduced on the S4810. neighbor advertisement-interval c e s Set the advertisement interval between BGP neighbors or within a BGP peer group. Syntax Parameters Defaults Command Modes Command History neighbor {ip-address | peer-group-name} advertisement-interval seconds To return to the default value, use the no neighbor {ip-address | peer-group-name} advertisement-interval command. ip-address peer-group-name seconds Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to set the advertisement interval for all routers in the peer group. Enter a number as the time interval, in seconds, between BGP advertisements. Range: 0 to 600 seconds. Default: 5 seconds for internal BGP peers; 30 seconds for external BGP peers. seconds = 5 seconds (internal peers); seconds = 30 seconds (external peers) ROUTER BGP Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series neighbor advertisement-start c e s Set the minimum interval before starting to send BGP routing updates. Syntax neighbor {ip-address} advertisement-start seconds To return to the default value, use the no neighbor {ip-address} advertisement-start command. Border Gateway Protocol IPv4 (BGPv4) | 339