Dell Force10 S4820T FTOS Command Reference Guide - Page 58
Example, S-Series, S4810 & S4820T, File Management, support.dell.com
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
www.dell.com | support.dell.com Example (S-Series) Example (S4810 & S4820T) 58 | File Management 1 2-port 10GE LAN PHY line card with 10Km (1310nm) optics (ED) 1 12-port OC12c/3c PoS line card with IR optics (EC) 1 24-port GE line card with SFP optics (ED) 1 FastEthernet/IEEE 802.3 interface(s) 120 GigabitEthernet/IEEE 802.3 interface(s) 14 SONET network interface(s) 4 Ten GigabitEthernet/IEEE 802.3 interface(s) FTOS# FTOS#show version Dell Force10 Networks Real Time Operating System Software Dell Force10 Operating System Version: 1.0 Dell Force10 Application Software Version: E7-8-1-13 Copyright (c) 1999-2008 by Dell Force10 Networks, Inc. Build Time: Mon Nov 24 18:59:27 2008 Build Path: /local/local/sw/build/build2/Release/7-8-1/SW/SRC Dell Force10 uptime is 1 minute(s) System Type: S50V Control Processor: MPC8451E with 252739584 bytes of memory. 32M bytes of boot flash memory. 1 48-port E/FE/GE with POE (SB) 48 GigabitEthernet/IEEE 802.3 interface(s) 4 Ten GigabitEthernet/IEEE 802.3 interface(s) FTOS# FTOS# FTOS#show version Dell Force10 Real Time Operating System Software Dell Force10 Operating System Version: 1.0 Dell Force10 Application Software Version: Z9K-ICC-PRIM-SYNC-8-3-11-173 Copyright (c) 1999-2012 by Dell Inc. All Rights Reserved. Build Time: Mon Jul 16 22:19:01 PDT 2012 Build Path: /local/local/build/build15/8.3.12.0/SW/SRC/Radius FTOS uptime is 1 minute(s) System image file is "s4810-14" System Type: S4810 Control Processor: Freescale QorIQ P2020 with 2147483648 bytes of memory. 128M bytes of boot flash memory. 1 52-port GE/TE/FG (SE) 52 Ten GigabitEthernet/IEEE 802.3 interface(s) FTOS# FTOS# FTOS# FTOS#config t FTOS(conf)#int te 0/5 FTOS(conf-if-te-0/5)#no shut FTOS(conf-if-te-0/5)# FTOS(conf-if-te-0/5)# FTOS(conf-if-te-0/5)# FTOS(conf-if-te-0/5)#ipv6 nd prefix FEC0::/10 FTOS(conf-if-te-0/5)# FTOS(conf-if-te-0/5)#show conf ! interface TenGigabitEthernet 0/5 ip address 78.21.1.3/24 ipv6 nd prefix fec0::/10 flowcontrol rx on tx on no shutdown FTOS(conf-if-te-0/5)#