Dell Force10 S4820T FTOS Command Reference Guide - Page 716

www.dell.com | support.dell.com Table 24-8. show ip cam summary Command Example Fields Field Prefix Length Current Use Initial Size Description Displays the prefix-length or mask for the IP address configured on the linecard 0 port pipe 0. Displays the number of routes currently configured for the corresponding prefix or mask on the linecard 0 port pipe 0. Displays the CAM size allocated by FTOS for the corresponding mask. The CAM size is adjusted by FTOS if the number of routes for the mask exceeds the initial allocation. show ip cam stack-unit s Display content-addressable memory (CAM) entries for an S-Series switch. Syntax Parameters Command Modes Command History Example show ip cam stack-unit 0-7 port-set pipe-number [ip-address mask [longer-prefixes] | detail | member-info | summary] 0-7 pipe-number ip-address mask [longer-prefix] detail member-info summary Enter the stack-unit ID, from 0 to 7. Enter the number of the Port-Pipe number. S50n, S50V range: 0 to 1; S25N, S25P, S25V range: 0 to 0 (OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. Enter the keyword longer-prefixes to view routes with a common prefix. Enter the keyword detail to display the group index ID used by the ecmp routes in the CAM. Enter the keyword member-info to display the group index used by the ecmp, the number of egress ports (members) for the ecmp, and the port details of each member. The detail information under member-info will give the MAC address, VLAN ID and gateway of every member port of the ecmp. (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number routes which can be entered in to CAM. EXEC EXEC Privilege Version 8.3.19.0 Version 7.7.1.0 Version 7.6.1.0 Introduced on S4820T Modified: Added support for up to seven stack members. Introduced on S-Series FTOS#show ip cam stack-unit 0 port-set 0 10.10.10.10/32 longer-prefixes Destination EC CG V C VId Mac-Addr Port 716 | IPv4 Routing