Dell Force10 S4820T FTOS Command Reference Guide - Page 545

debug frrp c e Enable FRRP debugging. Syntax Parameters Defaults Command Modes Command History Usage Information debug frrp {event | packet | detail} [ring-id] [count number] To disable debugging, use the no debug frrp {event | packet | detail} {ring-id} [count number] command. event packet detail ring-id count number Enter the keyword event to display debug information related to ring protocol transitions. Enter the keyword packet to display brief debug information related to control packets. Enter the keyword detail to display detailed debug information related to the entire ring protocol packets. (Optional) Enter the ring identification number. Range: 1 to 255 Enter the keyword count followed by the number of debug outputs. Range: 1 to 65534 Disabled CONFIGURATION (conf-frrp) Version 8.3.19.0 Version 8.3.7.0 Version 8.2.1.0 Version 7.4.1.0 Introduced for the S4820T Introduced for the S4810 Introduced for the C-Series Introduced Since the Resilient Ring Protocol can potentially transmit 20 packets per interface, debug information must be restricted. description c e Enter an identifying description of the ring. Syntax description Word To remove the ring description, use the no description [Word] command. Parameters Word Enter a description of the ring. Maximum: 255 characters Defaults No default values or behavior Force10 Resilient Ring Protocol (FRRP) | 545