Dell Force10 S4820T FTOS Command Reference Guide - Page 732

www.dell.com | support.dell.com Table 24-16. show ip traffic output definitions Keyword Definition ... reassembled ... timeouts ... too big Number of IP fragments that were reassembled. Number of times a timer expired on a reassembled queue. Number of invalid IP fragments received. ... couldn't fragment Number of packets that could not be fragmented and forwarded. ...encapsulation failed Rcvd: ...short packets ...bad length Counts those packets which could not be forwarded due to ARP resolution failure. FTOS sends an arp request prior to forwarding an IP packet. If a reply is not received, FTOS repeats the request three times. These packets are counted in encapsulation failed. The number of bytes in the packet are too small. The length of the packet was not correct. ...no port broadcasts The incoming broadcast/multicast packet did not have any listener. ...socket full The applications buffer was full and the incoming packet had to be dropped. Usage Information The F10 Monitoring MIB provides access to the statistics described below. Table 24-17. F10 Monitoring MIB Command Display IP statistics: Bcast: Received Sent Mcast: Received Sent ARP statistics: Rcvd: Request Replies Sent: Request Replies Proxy Object OIDs f10BcastPktRecv f10BcastPktSent f10McastPktRecv f10McastPktSent 1.3.6.1.4.1.6027.3.3.5.1.1 1.3.6.1.4.1.6027.3.3.5.1.2 1.3.6.1.4.1.6027.3.3.5.1.3 1.3.6.1.4.1.6027.3.3.5.1.4 f10ArpReqRecv f10ArpReplyRecv f10ArpReqSent f10ArpReplySent f10ArpProxySent 1.3.6.1.4.1.6027.3.3.5.2.1 1.3.6.1.4.1.6027.3.3.5.2.3 1.3.6.1.4.1.6027.3.3.5.2.2 1.3.6.1.4.1.6027.3.3.5.2.4 1.3.6.1.4.1.6027.3.3.5.2.5 show protocol-termination-table 732 | IPv4 Routing