Dell Force10 S4820T FTOS Command Reference Guide - Page 341
c e s
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
neighbor default-originate c e s Inject the default route to a BGP peer or neighbor. Syntax Parameters Defaults Command Modes Usage Information Command History neighbor {ip-address | peer-group-name} default-originate [route-map map-name] To remove a default route, use the no neighbor {ip-address | peer-group-name} default-originate command. ip-address peer-group-name route-map map-name Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to set the default route of all routers in that peer group. (OPTIONAL) Enter the keyword route-map followed by the name of a configured route map. Not configured. ROUTER BGP If you apply a route map to a BGP peer or neighbor with the neighbor default-originate command configured, the software does not apply the set filters in the route map to that BGP peer or neighbor. Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series neighbor description c e s Assign a character string describing the neighbor or group of neighbors (peer group). Syntax Parameters neighbor {ip-address | peer-group-name} description text To delete a description, use the no neighbor {ip-address | peer-group-name} description command. ip-address peer-group-name text Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group. Enter a continuous text string up to 80 characters. Border Gateway Protocol IPv4 (BGPv4) | 341