Dell Force10 S4820T FTOS Command Reference Guide - Page 1509

Parameters Defaults Command Mode Command History Usage Information Related Commands 0 | 1 green | red | yellow Enter the bit value you want to map to a color. Choose a color: • Green: High priority packets that are the least preferred to be dropped. • Yellow: Lower priority packets that are treated as best-effort. • Red: Lowest priority packets that are always dropped (regardless of congestion status). Disabled; Packets with an unmapped DEI value are colored green. INTERFACE Version 8.3.19.0 Version 8.3.7.0 Version 8.3.1.0 Introduced on S4820T Introduced on S4810 Introduced on C-Series and S-Series. You must first enable DEI for this configuration to take effect. dei enable dei mark c s Set the DEI value on egress according to the color currently assigned to the packet. Syntax Parameters Defaults Command Mode Command History Usage Information dei mark {green | yellow} {0 | 1} 0 | 1 green | yellow Enter the bit value you want to map to a color. Choose a color: • Green: High priority packets that are the least preferred to be dropped. • Yellow: Lower priority packets that are treated as best-effort. All the packets on egress will be marked with DEI 0. INTERFACE Version 8.3.19.0 Version 8.3.7.0 Version 8.3.1.0 Introduced on S4820T Introduced on S4810 Introduced on C-Series and S-Series. You must first enable DEI for this configuration to take effect. VLAN Stacking | 1509