Dell Force10 S4820T FTOS Command Reference Guide - Page 398

www.dell.com | support.dell.com Command History Version 7.8.1.0 Version 7.7.1.0 Introduced support on S-Series Introduced support on C-Series bgp dampening c et s Enable MBGP route dampening. Syntax bgp dampening [half-life time] [route-map map-name] To disable route dampening, use the no bgp dampening [half-life time] [route-map map-name] command. Parameters half-life time route-map map-name (OPTIONAL) Enter the number of minutes after which the Penalty is decreased. After the router assigns a Penalty of 1024 to a route, the Penalty is decreased by half, after the half-life period expires. Range: 1 to 45. Default: 15 minutes (OPTIONAL) Enter the keyword route-map followed by the name of a configured route map. Only match commands in the configured route map are supported. Defaults Disabled. Command Modes ROUTER BGP Address Family (conf-router_bgp_af) Command History Version 7.8.1.0 Version 7.7.1.0 Version 7.6.1.0 Introduced support on S-Series Introduced support on C-Series Introduced IPv6 MGBP support for E-Series clear ip bgp ipv4 multicast c et s Reset MBGP sessions. Syntax clear ip bgp ipv4 multicast * ip-address [dampening | flap-statistics] peer-group] Parameters * ip-address dampening flap-statistics peer-group Enter the character * to clear all peers. Enter an IP address in dotted decimal format to clear the prefixes from that neighbor. (OPTIONAL) Enter the keyword dampening to clear route flap dampening information. (OPTIONAL) Enter the keyword flap-statistics to reset the flap statistics on all prefixes from that neighbor. (OPTIONAL) Enter the keyword peer-group to clear all members of a peer-group. 398 | Border Gateway Protocol IPv4 (BGPv4)