Dell Force10 S4820T FTOS Command Reference Guide - Page 1050

www.dell.com | support.dell.com clear ip mroute c e s Clear learned multicast routes on the multicast forwarding table. To clear the PIM tree information base, use clear ip pim tib command. Syntax Parameters Command Modes Command History Related Commands clear ip mroute {group-address [source-address] | *} group-address [source-address] * Enter multicast group address and source address (if desired), in dotted decimal format, to clear information on a specific group. Enter * to clear all multicast routes. EXEC Privilege Version 8.3.19.0 Introduced on S4820T Version 8.3.7.0 Introduced on S4810 Version 7.8.1.0 Introduced on C-Series E-Series legacy command show ip pim tib Show the PIM Tree Information Base. clear ip mroute snooping e x Clear the multicast routes learned through PIM-SM snooping from the IPv4 multicast snooping table. To clear tree information learned through PIM-SM snooping from the PIM tree information base, use clear ip pim snooping tib command. Syntax clear ip mroute snooping {vlan vlan-id [group-address [source-address] | *} Parameters vlan vlan-id group-address [source-address] * Enter a VLAN ID to clear information learned through PIM-SM snooping about a specified VLAN. Valid VLAN IDs: 1 to 4094. (OPTIONAL) Enter a group address and, optionally, a source address in dotted decimal format, to clear information learned through PIM-SM snooping about a specified multicast group and source. Enter * to clear all multicast routes learned through PIM-SM snooping. Command Modes Command History Related Commands EXEC Privilege Version 8.4.1.1 Introduced on E-Series ExaScale show ip pim snooping tib show ip pim tib Display the information from the PIM tree information base learned through PIM snooping. Show the PIM Tree Information Base. 1050 | Multicast