Dell Force10 S4820T FTOS Command Reference Guide - Page 648

www.dell.com | support.dell.com Vlan 2 Name: GigabitEthernet 13/3 802.1QTagged: True Vlan membership: Vlan 2 --More-- Table 23-8. Items in show interfaces switchport Command Example Items Name 802.1QTagged Vlan membership Description Displays the interface's type, slot and port number. Displays whether if the VLAN tagged ("True"), untagged ("False"), or hybrid ("Hybrid"), which supports both untagged and tagged VLANs by port 13/0. Lists the VLANs to which the interface is a member. Starting with FTOS 7.6.1, this field can display native VLAN membership by port 13/0. Related Commands interface show ip interface show interfaces show interfaces transceiver Configure a physical interface on the switch. Displays Layer 3 information about the interfaces. Display information on a specific physical interface or virtual interface. Display the physical status and operational status of an installed transceiver. The output also displays the transceiver's serial number. show interfaces transceiver c e s z Display the physical status and operational status of an installed transceiver. The output also displays the transceiver's serial number. Syntax show interfaces [gigabitethernet slot/port | tengigabitethernet slot/port | fortyGigE slot/port] transceiver Parameters gigabitethernet tengigabitethernet fortyGigE For a 10/100/1000 interface, enter the keyword gigabitethernet followed by the slot/port information. For a 10G interface, enter the keyword tengigabitethernet followed by the slot/port information. For a 40G interface, enter the keyword fortyGigE followed by the slot/ port information. Command Modes EXEC EXEC Privilege Command History Version 8.3.11.1 Version 8.5.1.0 Version 8.1.1.0 Introduced on Z9000. Added support for 4-port 40G line cards on ExaScale. Introduced on E-Series ExaScale. 648 | Interfaces