Dell Force10 S4820T FTOS Command Reference Guide - Page 498

www.dell.com | support.dell.com 5 - - 6 - - 7 - - 8 - - show stack-unit stack-ports pfc detail Displays the PFC configuration applied to ingress traffic on stacked ports, including PFC operational mode on each unit with the configured priorities, link delay, and number of pause packets sent and received. Syntax show stack-unit {all | stack-unit} stack-ports {all | port-number} pfc detail Parameters stack-unit port-number Enter the stack unit. Enter the port number. Command Mode EXEC PRIVILEGE Command History Version 8.3.19.0 Version 8.3.12.0 Version 8.3.16.0 Introduced on the S4820T. Introduced on the S4810. Introduced on MXL 10/40GbE Switch IO Module Example FTOS(conf)# show stack-unit all stack-ports all pfc details stack unit 0 stack-port all Admin mode is On Admin is enabled, Priority list is 4-5 Local is enabled, Priority list is 4-5 Link Delay 45556 pause quantum 0 Pause Tx pkts, 0 Pause Rx pkts stack unit 1 stack-port all Admin mode is On Admin is enabled, Priority list is 4-5 Local is enabled, Priority list is 4-5 Link Delay 45556 pause quantum 0 Pause Tx pkts, 0 Pause Rx pkts 498 | Data Center Bridging