Dell Force10 S4820T FTOS Command Reference Guide - Page 1129

show ip ospf routes c e s Display routes as calculated by OSPF and stored in OSPF RIB. Syntax show ip ospf process-id routes Parameters process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Defaults No default values or behavior Command Modes EXEC EXEC Privilege Command History Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 Introduced on S4820T Introduced on S4810 Introduced support of Multi-Process OSPF. Introduced on S-Series Introduced on C-Series and E-Series Usage Information This command is useful in isolating routing problems between OSPF and RTM. For example, if a route is missing from the RTM/FIB but is visible from the display output of this command, then likely the problem is with downloading the route to the RTM. This command has the following limitations: Example • The display output is sorted by prefixes; intra-area ECMP routes are not displayed together. • For Type 2 external routes, type1 cost is not displayed. FTOS#show ip ospf 100 route Prefix 1.1.1.1 3.3.3.3 13.0.0.0 150.150.150.0 172.30.1.0 FTOS# Cost 1 2 1 2 2 Nexthop 0.0.0.0 13.0.0.3 0.0.0.0 13.0.0.3 13.0.0.3 Interface Lo 0 Gi 0/47 Gi 0/47 Gi 0/47 Gi 0/47 Area 0 1 0 1 Type Intra-Area Intra-Area Intra-Area External Intra-Area show ip ospf statistics c e s Display OSPF statistics. Syntax show ip ospf process-id statistics global | [interface name {neighbor router-id}] Open Shortest Path First (OSPFv2) | 1129