Dell Force10 S4820T FTOS Command Reference Guide - Page 1230

www.dell.com | support.dell.com Defaults Layer 3 Command Modes CONFIGURATION Command History Version 8.3.19.0 Version 8.3.7.0 Version 8.2.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 pre-Version 6.1.1.1 Introduced on S4820T Introduced on S4810 Policy name character limit increased from 16 to 32. Introduced on S-Series Introduced on C-Series Expanded to add support for Layer 2 Introduced on E-Series Usage Information Input policy map is used to classify incoming traffic to different flows using class-map, QoS policy, or simply using incoming packets DSCP. This command enables policy-map-input configuration mode (conf-policy-map-in). Related Commands service-queue policy-aggregate service-policy input Assign a class map and QoS policy to different queues. Allow an aggregate method of configuring per-port QoS via policy maps. Apply an input policy map to the selected interface. policy-map-output c e s Create an output policy map. Syntax policy-map-output policy-map-name To remove a policy map, use the no policy-map-output policy-map-name command. Parameters policy-map-name Enter the name for the policy map in character format (16 characters maximum). Defaults No default behavior or values Command Modes CONFIGURATION Command History Version 8.3.19.0 Version 8.3.7.0 Version 8.2.1.0 Version 7.6.1.0 pre-Version 6.1.1.1 Introduced on S4820T Introduced on S4810 Policy name character limit increased from 16 to 32. Introduced on C-Series and S-Series Introduced on E-Series 1230 | Quality of Service (QoS)