Dell Force10 S4820T FTOS Command Reference Guide - Page 1203
vlan bridge-priority
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1203 highlights
Usage Information Version 7.5.1.0 Version 6.5.1.0 Support added for C-Series Introduced By default FTOS implements an optimized flush mechanism for PVST+. This helps in flushing the MAC addresses only when necessary (and less often) allowing for faster convergence during topology changes. However, if a standards-based flush mechanism is needed, this knob command can be turned on to enable flushing MAC addresses upon receiving every topology change notification. vlan bridge-priority c e s Set the PVST+ bridge-priority for a VLAN or a set of VLANs. Syntax Parameters Defaults Command Modes Command History Related Commands vlan vlan-range bridge-priority value To return to the default value, enter no vlan bridge-priority command. vlan vlan-range bridge-priority value Enter the keyword vlan followed by the VLAN number(s). Range: 1 to 4094 Enter the keyword bridge-priority followed by the bridge priority value in increments of 4096. Range: 0 to 61440 Default: 32768 32768 CONFIGURATION (conf-pvst) version 8.3.19.0 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 Version 6.2.1.1 Introduced on S4820T Introduced on S4810 Support added for S-Series Support added for C-Series Introduced vlan forward-delay vlan hello-time vlan max-age show spanning-tree pvst Change the time interval before FTOS transitions to the forwarding state Change the time interval between BPDUs Change the time interval before PVST+ refreshes Display the PVST+ configuration Per-VLAN Spanning Tree Plus (PVST+) | 1203