Dell Force10 S4820T FTOS Command Reference Guide - Page 1369

Command History Usage Information Related Commands Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced for S-Series Introduced for C-Series Introduced for E-Series If you want to log in without being prompted for a password, log in through RSA authentication. To do that, you must first add the SSHv2 RSA public keys to the list of authorized keys. This command adds the specified RSA keys to the following file: flash://ADMIN_DIR/ssh/authorized-keys-username (where username is the user associated with this terminal). Note: The no form of this command deletes the file flash://ADMIN_DIR/ssh/ authorized-keys-username show ip ssh rsa-authentication ip ssh rsa-authentication (Config) Display RSA authorized keys. Enable RSA authentication. ip ssh server c e s Configure an SSH server. Syntax Parameters Defaults Command Modes Command History Note: Some of the parameters in this command require licensing to access. For more information, please contact your Dell Force10 representative. ip ssh server {enable | port port-number} [version {1 | 2}] To disable SSH server functions, enter no ip ssh server enable command. enable port port-number [version {1 | 2}] Enter the key word enable to start the SSH server. (OPTIONAL) Enter the keyword port followed by the port number of the listening port of the SSH server. Range: 1 to 65535 Default: 22 (OPTIONAL) Enter the keyword version followed by the SSH version 1 or 2 to specify only SSHv1 or SSHv2. Note: If FIPS mode is enabled, only version 2 can be selected. Default listening port is 22 CONFIGURATION Version 8.3.19.0 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on S4820T Introduced on S4810 Introduced for S-Series Expanded to include specifying SSHv1 or SSHv2; Introduced for C-Series Introduced for E-Series Security | 1369