Dell Force10 S4820T FTOS Command Reference Guide - Page 1128

www.dell.com | support.dell.com Table 37-10. Command Example Descriptions: show ip ospf process-id interface (continued) Line beginning with Hello due... Neighbor Count... Description This line displays the amount time till the next Hello packet is sent out this interface. This line displays the number of neighbors and adjacent neighbors. Listed below this line are the details about each adjacent neighbor. show ip ospf neighbor c e s Display the OSPF neighbors connected to the local router. Syntax show ip ospf process-id neighbor Parameters process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Command Modes EXEC Privilege Command History Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on S4820T Introduced on S4810 Introduced support of Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series Example FTOS#show ip ospf 34 neighbor Neighbor ID Pri State Dead Time Address 20.20.20.7 1 FULL/DR 00:00:32 182.10.10.3 192.10.10.2 1 FULL/DR 00:00:37 192.10.10.2 20.20.20.1 1 FULL/DROTHER00:00:36 192.10.10.4 FTOS# Interface Area Gi 0/0 0.0.0.2 Gi 0/1 0.0.0.1 Gi 0/1 0.0.0.1 Table 37-11. Command Example Descriptions: show ip ospf process-id neighbor Row Heading Neighbor ID Pri State Dead Time Address Interface Area Description Displays the neighbor router ID. Displays the priority assigned neighbor. Displays the OSPF state of the neighbor. Displays the expected time until FTOS declares the neighbor dead. Displays the IP address of the neighbor. Displays the interface type slot/port information. Displays the neighbor's area (process ID). 1128 | Open Shortest Path First (OSPFv2)