Dell Force10 S4820T FTOS Command Reference Guide - Page 1135

Table 37-14. Command Example Descriptions: show ip ospf process-id virtual-links Items "Virtual Link..." "Run as..." "Transit area..." "Transmit Delay..." "Timer intervals..." "Hello due..." "Adjacency State..." Description This line specifies the OSPF neighbor to which the virtual link was created and the link's status. This line states the nature of the virtual link. This line identifies the area through which the virtual link was created, the interface used, and the cost assigned to that link. This line displays the transmit delay assigned to the link and the State of the OSPF neighbor. This line displays the timer values assigned to the virtual link. The timers are Hello is hello-interval, Dead is dead-interval, Wait is transmit-delay, and Retransmit is retransmit-interval. This line displays the amount of time until the next Hello packet is expected from the neighbor router. This line displays the adjacency state between neighbors. summary-address c e s Set the OSPF ASBR to advertise one external route. Syntax summary-address ip-address mask [not-advertise] [tag tag-value] To disable summary address, use the no summary-address ip-address mask command. Parameters ip-address mask not-advertise tag tag-value Specify the IP address in dotted decimal format of the address to be summarized. Specify the mask in dotted decimal format of the address to be summarized. (OPTIONAL) Enter the keyword not-advertise to suppress that match the network prefix/mask pair. (OPTIONAL) Enter the keyword tag followed by a value to match on routes redistributed through a route map. Range: 0 to 4294967295 Defaults Not configured. Command Modes ROUTER OSPF Command History Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 Introduced on S4820T Introduced on S4810 Introduced support of Multi-Process OSPF. Introduced on S-Series Open Shortest Path First (OSPFv2) | 1135