Dell Force10 S4820T FTOS Command Reference Guide - Page 249
Con a filter to pass packets matching the criteria specified., Example, Related, Commands
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Example Related Commands FTOS(conf)#mac-access-list access-list extended TestMATExt FTOS(config-ext-macl)#remark 5 IPv4 FTOS(config-ext-macl)#seq 10 permit any any ev2 eq 800 count bytes FTOS(config-ext-macl)#remark 15 ARP FTOS(config-ext-macl)#seq 20 permit any any ev2 eq 806 count bytes FTOS(config-ext-macl)#remark 25 IPv6 FTOS(config-ext-macl)#seq 30 permit any any ev2 eq 86dd count bytes FTOS(config-ext-macl)#seq 40 permit any any count bytes FTOS(config-ext-macl)#exit FTOS(conf)#do show mac accounting access-list snickers interface g0/47 in Extended mac access-list snickers on GigabitEthernet 0/47 seq 10 permit any any ev2 eq 800 count bytes (559851886 packets 191402152148 bytes) seq 20 permit any any ev2 eq 806 count bytes (74481486 packets 5031686754 bytes) seq 30 permit any any ev2 eq 86dd count bytes (7751519 packets 797843521 bytes) mac access-list standard show mac accounting access-list Configure a standard MAC access list. Display MAC access list configurations and counters (if configured). permit c e s Syntax Parameters Configure a filter to pass packets matching the criteria specified. permit {any | host mac-address | mac-source-address mac-source-address-mask} {any | host mac-address | mac-destination-address mac-destination-address-mask} [ethertype operator] [count [byte]] | [log] [monitor] To remove this filter, you have two choices: • Use the no seq sequence-number command syntax if you know the filter's sequence number or • Use the no permit {any | host mac-address | mac-source-address mac-source-address-mask} {any | mac-destination-address mac-destination-address-mask} command. any host mac-source-address mac-source-address-mask mac-destination-address Enter the keyword any to forward all packets. Enter the keyword host followed by a MAC address to forward packets with that host address. Enter the source MAC address in nn:nn:nn:nn:nn:nn format. Specify which bits in the MAC address must be matched. The MAC ACL supports an inverse mask, therefore, a mask of ff:ff:ff:ff:ff:ff allows entries that do not match and a mask of 00:00:00:00:00:00 only allows entries that match exactly. Enter the destination MAC address and mask in nn:nn:nn:nn:nn:nn format. Access Control Lists (ACL) | 249