Dell Force10 S4820T FTOS Command Reference Guide - Page 729

Related Commands Example Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on E-Series ExaScale Introduced on S-Series Introduced on C-Series Introduced for E-Series ip prefix-list show ip prefix-list summary Enter the CONFIGURATION-IP PREFIX-LIST mode and configure a prefix list. Display a summary of the configured prefix lists. FTOS#show ip route list test Codes: C - connected, S - static, R - RIP, B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated, O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default, > - non-active route, + - summary route Gateway of last resort is not set Destination ----------R 2.1.0.0/24 R 2.1.1.0/24 R 2.1.2.0/24 R 2.1.3.0/24 C 2.1.4.0/24 Gateway ------via 2.1.4.1, Gi 4/43 via 2.1.4.1, Gi 4/43 via 2.1.4.1, Gi 4/43 via 2.1.4.1, Gi 4/43 Direct, Gi 4/43 Dist/Metric Last Change 120/2 3d0h 120/2 3d1h 120/1 3d0h 120/1 3d1h 0/0 3d1h show ip route summary c e s View a table summarizing the IP routes in the switch. Syntax Command Modes Command History Example show ip route summary EXEC EXEC Privilege Version 8.3.19.0 Version 8.3.7.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on S4820T Introduced on S4810 Introduced on E-Series ExaScale Introduced on S-Series Introduced on C-Series Introduced for E-Series FTOS>show ip route summary Route Source Active Routes Non-active Routes IPv4 Routing | 729