Dell Force10 S4820T FTOS Command Reference Guide - Page 1054

www.dell.com | support.dell.com mac-flood-list e Provide an exception to the restrict-flood configuration so that multicast frames within a specified MAC address range to be flooded on all ports in a VLAN. Syntax mac-flood-list mac-address mask vlan vlan-list [min-speed speed] Parameters mac-address mac-mask vlan vlan-list min-speed min-speed Enter a multicast MAC address in hexadecimal format. Enter the MAC Address mask. Enter the VLAN(s) in which flooding will be restricted. Separate values by commas - no spaces ( 1,2,3 ) or indicate a list of values separated by a hyphen (1-3). Range: 1 to 4094 (OPTIONAL) Enter the minimum link speed that ports must have to receive the specified flooded multicast traffic. Defaults None Command Modes CONFIGURATION Command History Usage Information Version 7.7.1.0 Introduced on E-Series When the mac-flood-list with the min-speed option is used in combination with the restrict-flood command, mac-flood-list command has higher priority than the restrict-flood command. Therefore, all multicast frames matching the mac-address range specified using the mac-flood-list command are flooded according to the mac-flood-list command. Only the multicast frames not matching the mac-address range specified using the mac-flood-list command are flooded according to the restrict-flood command. Related Commands restrict-flooding Prevent Layer 2 multicast traffic from being forwarded on ports below a specified speed. mtrace e Syntax Parameters Command Modes Trace a multicast route from the source to the receiver. mtrace {source-address/hostname} {destination-address/hostname} {group-address} source-address/ hostname destination-address/ hostname group-address Enter the source IP address in dotted decimal format (A.B.C.D). Enter the destination (receiver) IP address in dotted decimal format (A.B.C.D). Enter the multicast group address in dotted decimal format (A.B.C.D). EXEC Privilege 1054 | Multicast