Dell Force10 S4820T FTOS Command Reference Guide - Page 1451

Parameters Defaults Command Mode Command History Usage Information unit-id stack-group-id Enter the stack unit ID. Enter the stack group ID. Range is 0 to 15. None CONFIGURATION Version 8.3.19.0 Version 8.3.12.0 Version 8.3.10.2 Introduced on S4820T Reset command mode from EXEC to CONFIGURATION. Introduced on S4810 The following message displays to confirm the command. Warning: Setting ports Fo 0/60 as stack group will make their interface configs obsolete after a reload.[confirm yes/no]: If "y" is entered, all non-default configurations on any member ports of the current stack group will be removed when the unit is rebooted. Note: Any scripts used to streamline the stacking configuration process must be updated to reflect the Command Mode change from EXEC Privilege to CONFIGURATION to allow the scripts to work correctly. upgrade system stack-unit (S-Series stack member) s Copy the boot image or FTOS from the management unit to one or more stack members. Syntax Parameters Defaults Command Modes upgrade {boot | system} stack-unit {all | 0-11 | A | B} boot system all 0-11 A B Enter this keyword to copy the boot image from the management unit to the designated stack members. Enter this keyword to copy the FTOS image from the management unit to the designated stack members. Enter this keyword to copy the designated image to all stack members. Enter the unit ID of the stack member to which to copy the designated image. Enter this keyword to upgrade all stacked units in System A(S4810 and S4820T only) Enter this keyword to upgrade all stacked units in System B(S4810 and S4820T only) No configuration or default values EXEC S-Series Stacking Commands | 1451