Dell Force10 S4820T FTOS Command Reference Guide - Page 373

FTOS# The show ip bgp community-list command without any parameters lists BGP routes matching the Community List and the output is the same as for the show ip bgp command output. Table 9-4. show ip bgp community-list Command Example Fields Field Network Next Hop Metric LocPrf Weight Path Description Displays the destination network prefix of each BGP route. Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table. Displays the BGP route's metric, if assigned. Displays the BGP LOCAL_PREF attribute for the route. Displays the route's weight Lists all the ASs the route passed through to reach the destination network. Command History Version 8.3.19.0 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced support on S-Series Introduced support on C-Series show ip bgp dampened-paths c e s View BGP routes that are dampened (non-active). Syntax Command Modes Example show ip bgp [ipv4 unicast] dampened-paths EXEC EXEC Privilege FTOS>show ip bgp damp BGP table version is 210708, local router ID is 63.114.8.2 Status codes: s suppressed, d damped, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network Origin codes: i - IGP, e - EGP, ? - incomplete Network From Reuse Path FTOS> Border Gateway Protocol IPv4 (BGPv4) | 373