Dell Force10 S4820T FTOS Command Reference Guide - Page 363

Usage Information Related Commands Command History With FTOS version 8.3.1.0 and later, the redistribute command can be used to advertise the IGP cost as the MED on redistributed routes. When the route-map is set with metric-type internal and applied outbound to an EBGP peer/peer-group, the advertised routes corresponding to those peer/peer-group will have IGP cost set as MED. If you do not configure default-metric command, in addition to the redistribute command, or there is no route map to set the metric, the metric for redistributed static and connected is "0". To redistribute the default route (0.0.0.0/0) configure the neighbor default-originate command. neighbor default-originate Inject the default route. Version 8.3.19.0 Version 8.3.7.0 Version 8.3.1.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S4820T. Introduced on the S4810. Introduced ability to substitute IGP cost for MED when a peer/peer-group outbound route-map is set as internal. Introduced support on S-Series Introduced support on C-Series redistribute isis e Redistribute IS-IS routes into BGP. Syntax redistribute isis [WORD][level-1| level-1-2 | level-2] [metric metric-value] [route-map map-name] To return to the default values, enter the no redistribute isis [WORD][level-1| level-1-2 | level-2] [metric metric-value] [route-map map-name] command. Parameters WORD level-1 level-1-2 level-2 ISO routing area tag (OPTIONAL) Enter the keyword level-1 to independently redistributed into Level 1 routes only. (OPTIONAL) Enter the keyword level-1-2 to independently redistributed into Level 1 and Level 2 routes. This is the default. (OPTIONAL) Enter the keyword level-2 to independently redistributed into Level 2 routes only Border Gateway Protocol IPv4 (BGPv4) | 363