Dell Force10 S4820T FTOS Command Reference Guide - Page 1240
CONFIGURATION conf-policy-map-in and conf-policy-map-out
View all Dell Force10 S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1240 highlights
www.dell.com | support.dell.com Parameters queue-id class-map class-map-name qos-policy qos-policy-name Enter the value used to identify a queue. Range: 0 to 7 on E-Series (eight queues per interface), 0-3 on C-Series and S-Series (four queues per interface; four queues are reserved for control traffic.) (OPTIONAL) Enter the keyword class-map followed by the class map name assigned to the queue in character format (16 character maximum). Note: This option is available under policy-map-input only. (OPTIONAL) Enter the keyword qos-policy followed by the QoS policy name assigned to the queue in text format (16 characters maximum). This specifies the input QoS policy assigned to the queue under policy-map-input and output QoS policy under policy-map-output context. Defaults No default behavior or values Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out) Command History Usage Information Version 8.3.19.0 Introduced on S4820T Version 8.3.7.0 Introduced on S4810 Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series pre-Version 6.1.1.1 Introduced on E-Series There are eight (8) queues per interface on the E-Series and four (4) queues per interface on the C-Series and S-Series. This command assigns a class map or QoS policy to different queues. Related Commands class-map service-policy input service-policy output Identify the class map. Apply an input policy map to the selected interface. Apply an output policy map to the selected interface. set c e s Mark outgoing traffic with a Differentiated Service Code Point (DSCP) or dot1p value. Syntax set {ip-dscp value | mac-dot1p value} Parameters ip-dscp value mac-dot1p value (OPTIONAL) Enter the keyword ip-dscp followed by the IP DSCP value. Range: 0 to 63 Enter the keyword mac-dot1p followed by the dot1p value. Range: 0 to 7 On the C-Series and S-Series allowed values are:0,2,4,6 1240 | Quality of Service (QoS)